It must not be inferred from the preceding remarks that the designer of
an air compressor may neglect the question of clearance. On the
contrary, it is a very important consideration. If we assume a large
clearance space in the end of an air cylinder of a compressor which is
furnishing air at a high pressure, we may readily conceive that space to
be so large, and that pressure so high, that the entire volume of the
cylinder would be filled by the air from the clearance space alone, and
the compressor would take in no free air and would, of course, produce
no compressed air.
Loss in _capacity_ of air compressors by clearance is in direct
proportion to the pressure.
Owing to the loss of capacity by clearance space at high pressures, it
is important that compound air cylinders should be used for furnishing
air at high pressure. With compound air cylinders the air is compressed
to alternate stages of pressure in the different cylinders, and the
clearance loss is thus reduced because of the reduced density of the air
in the clearance spaces. In ordinary practice air compressors deliver
the air at less than 100 pounds pressure, so that with a properly
designed air cylinder the clearance space is so small that the capacity
of the compressor is not materially affected.
Pages:
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76